Features:
Air cleaner: under hood
Cylinder: boron cast iron
Cylinder head: HT200 alloy cast iron with copper and chromium
Crankshaft: modular cast iron QT800-2
Crankshaft drive: by crankshaft through helical tooth spur
gear at blower end
Crankshaft case: grey cast iron
Pistons: aluminum alloy
Injection pump: plunger pump series I (right spiral)
Governor: model T7B-speed, mechanical centrifugal
Cooling system: forced water cooling
Lubrication: oil pressure lubrication
Overall Dimension Diagram:
A. Wheel base: 1800-1900 mm
B. Overall length: 3145 mm
C. Overall width (min.): 1450 mm
D. Heigh over exhaust: 2050 mm
E. Height over safety frame: 2269 mm
Engine Full Load Performance:
Model: Y395
Type: 3-cylinder vertical, water cooled, 4-stroke
Bore/Stroke: 95/105 mm
Displacement: 2.23L
Compression: 18
Rotations: Counterclockwise (view toward flywheel)
Power Take-Off:
Type: semi-independent dual speed (540 r/min/720r/min)
Configuration: 35mm/6 spline
Speed/@engine rpm: PTO 540/1993 rpm, PTO 720/2025 rpm
Steering/Brakes:
Steering type: hydraulic
Service brakes: disc type
Fluid Capacities (filling):
Fuel: 30L
Engine oil sump: 6L
Hydralic lifter: 8.8L
Steering gear: 6L
Cooling water: 7.2L
Electrical:
Alternator: JF121, 200W, 14V
Starter: QD13L, 2KW, 12V
Battery: 3-Q(A) - 120, 120A.H, 12V
Lights: 2 head light, 2 signal light, 1 tail lamp
Clutch:
Type: dual stage, gear operation
Size: 10"
Transmission
Type: (4+1) x 2 compound type
Fwd/Rev. speed: 8F/2R
Gears: 2 x 2
Ranges: 4
Options: none
Synchronization: none
Speed range: 2.13-26.02 km/hr/2.71-11.90 km/h
Performance:
Maximum PTO horse power measure at 2300 rpm: 35 HP
Hydraulics:
Type: closed center
Flow/Pressure: 16MPA
Type of pump: CBN-E310 gear pump
Max. flow at remove valves: 20L/min
Number of remove valves: 1
Type of remove valves: safety valve
3-Point:
Category: 1
Aux. lift cyl: std.
Lift cap @ hitch pt: 5790N (at 610mm behind lift point)
Controls: mechanics, synthesis
Chassis Data:
Pendulum angle of front axle: 12 degrees
Tires: front wheel 7.50-16, rear wheel 11.2-24
Tire inflation pressure (kpa):front wheel 220-250, rear wheel
(in field) 80-120, rear wheel (transportation) 120-140
Speed Ranges:
| Gear |
km/hr |
| 1 |
2.13 |
| 2 |
2.85 |
| 3 |
3.99 |
| 4 |
5.92 |
| 5 |
9.35 |
| 6 |
12.50 |
| 7 |
17.53 |
| 8 |
26.02 |
| R1 |
2.71 |
| R2 |
11.90 |
